| ![]() | 
  Reduce Ground Loop Interference With CCTV Signals!
![COP 15-GL01 [GL01] Coaxial Video Ground Loop Isolator](http://ep.yimg.com/ca/I/cu1_2094_802132) <------View Installation Diagram:
Rolling video? Picture tears? With the GL01 Ground loop isolator, these cctv problems can be cured.
15-GL01 Overview:
The COP Security / COP-USA GL01 video ground Loop Isolator is a passive device which can reduce ground loop interference with cctv signals and can easily be installed or added to a new or existing system.
The GL01 is very useful where a video signal is transmitted via cable between points with different ground potentials. Differences in ground potentials are typically caused by unbalanced power line loads.
15-GL01 Features
■ BNC male to BNC female with mini cable 15 on both sides.
■ Passive, no power required.
■ Prevents video-signal distortion caused by video ground loops.
■ Eliminates picture tearing, cross talk, and rolling.
■ Prevents power cables laid by others interfering with the cctv system.
■ Built in TVS (Transient Voltage Suppressors) for surge protection.
15-GL01 Specifications:
| Item No: |
15-GL01 |
| Insertion Loss: |
0.5dB |
| Frequency Response: |
0-3dB at 10Mhz |
| Input Resistance: |
75 ohm |
| Output Resistance: |
75 ohm |
| Isolation Voltage: |
600 VDC (min) |
| Insulation Resistance: |
100 m Ohm |
| Transient Voltage Suppressors: |
12 Vrms |
| Continuity |
0 |
| Dimensions: (WxHxD) (mm): |
84x28x21 with 15cm x 2 cable |
| Material: |
ABS Black |
|
|
