
- Supports any network device, including IP cameras
- Supports mega-pixel technology
- Fully transparent to the network
- Easy to install, no set up required
$798.00 |

- Remotely power IP devices through network cable up to 100m
- Short circuit, over current and over voltage protection
- Supports IEEE802.3af (15.4w) and IEEE802.3at (25.5w)
- Variable power input 100—240V
$78.00 |

- Sixteen PoE device ports
- 115VAC 50/60Hz, 2 amp input
- Primary fuse rated at 5amps/250V
- Provides 15.4 watts max. per channel
$818.00 |

- Rack mounted multi-channel Etherstretch solution
- Includes a built-in power source for all connected devices
- Each channel is capable of 10/100 connectivity to field devices
- Gigabit output to network
$4,722.00 |

- Supports mega-pixel cameras
- Supports multi-camera installations
- Fully transparent to the network
- Supports any network device, including IP cameras
$198.00 |

- Supports IEEE802.3af (15.4W) and IEEE802.3at (25.5W)
- No MAC or IP addressing required
- Variable power input 100 - 240V
- Built-in Ethernet and PoE surge protection
$2,361.00 |

- Transmits up to distances of 500 meters ⁄ 1,640 feet
- Supports PoE and network communications
- Supports any network device, including IP cameras
- Fully transparent to the network
$270.00 |

- Supports mega-pixel cameras
- Supports multi-camera installations
- Fully transparent to the network
- Supports any network device, including IP cameras
$900.00 |

- Supports mega-pixel cameras
- Supports multi-camera installations
- Fully transparent to the network
- Supports any network device, including IP cameras
$998.00 |

- Supports mega-pixel cameras
- Supports multi-camera installations
- Fully transparent to the network
- Supports any network device, including IP cameras
$1,080.00 |

- Supports multi-camera installations
- Fully tranparent to the network
- Supports any network device, including IP cameras
- Dual stage surge protection
$1,098.00 |

- Provides PoE on demand for up to four devices
- Supports mega-pixel cameras
- Supports multi-camera installations
- Fully transparent to the network
$1,398.00 |

- Fully transparent to the network
- Supports any network device, including IP cameras
- Dual stage surge protection.
- Easy to install, no set up required
$1,498.00 |

- Easy to install, no set up required
- No MAC or IP addressing required
- LED indicators for network signals, link status and power
- Includes Transmitter and Receiver units
$528.00 |

- Rack mounted multi-channel (8) Etherstretch solution
- Includes a built-in power source for all connected devices
- Gigabit output network connectivity
- Supports 10/100 and PoE over coax cable
$2,361.00 |

- No MAC or IP addressing required
- Short circuit, over current and over voltage protection
- Supports IEEE802.3af (15.4W) and IEEE802.3at (25.5W)
- Ground loop isolation
$2,361.00 |

- Ground loop isolation
- Extends PoE to Transmitter and Ip Cameras or Network Devices
- Transparent to the Network, no setup required
- Includes Receiver only - Transmitters Purchased Separately
$4,438.00 |

- Ground loop isolation
- Easy to install, no set up required
- No MAC or IP addressing required
- LED indicators for network signals, link status and power
$250.00 |

- Environmentally hardened
- Fully transparent to the network
- Built-in surge protection
- Easy to install, no set up required
$1,498.00 |

- Fully transparent to the network
- Built-in surge protection
- Easy to install, no set up required
- No MAC or IP addressing required
$970.00 |
 $270.00 |