The Nitek PV424 is a 4 port video, power, and control signal data distribution unit for your surveillance cameras. This system operates with other Nitek UTP video equipment including video hubs, standard video balun transceivers, active transmitters or any twisted pair equipped cctv camera.
This simple to install wall mounted locking cabinet contains a UTP video receiver and is integrated with a 28VAC four channel power supply. The PV424 transmits video, power and data through a UTP cable, and the cable then terminates with a standard RJ45 networking connector.
Nitek recommends a maximum cable distance of 750 feet which may be reduced based on camera power requirements. Video, camera power and data will be separated from the cable through a VB43ATF
or VB31AT video balun.
The PV424 provides power and video detection LEDs for easy troubleshooting, and camera ports are individually fused with a self resetting fuse. Additionally The PV424 and the DVR are ready to communicate in a matter of minutes by simply connecting a standard coaxial cable between the BNC video output connectors of the PV424 product and the DVR.
Furthermore the Nitek PV424 system can also adapt to existing communication and computer network spare pairs or new cable installations, and these units provide superior immunity from noise and interference, even when run in common raceways with AC.